Equine Dragon
$6.00 Equine Dragon
3D
Published 2022-10-04T06:25:29+00:00
The Equine Dragon is an articulating dragon model that can both sit up and lay down! It prints in place and will only need supports under the head.
There are 2 versions for the Equine Dragon.
Full model and separated model for larger printing or for printing on a smaller printer.
To assemble the separated version, you'll need to glue the peg into one of the legs, line up the tail with the body, insert the peg through the holes and then glue the peg into the other leg. I recommend doing a test fit before gluing the pieces together.
Use the test piece to help dial in your support settings for the head before printing the model.
Make sure to use support blockers to block off everywhere except the head (it will mess up the articulating parts otherwise) and set
support placement to "touching build plate."
Separated version was tested up to 133%
Full version was tested down to 66%.
I don't recommend going smaller then that on either version.
Please feel free to share images of your prints, I would love to see them! ^_^
For personal use only! You may not redistribute or sell my files in any way.
If you are interested in selling 3D Prints of my models (Files are never for redistribution in any way), visit my Tribes or Patreon for a commercial license and other monthly perks:
https://www.patreon.com/MysticSaige / https://www.myminifactory.com/users/MysticSaige?show=tribe
Happy Printing!!
Print in place - Supports are needed under the head.
3+ perimeters (the more the stronger it will be).
15%+ infill.
Make sure to enable bridge settings.
Great in PLA.
Make sure to have good bed adhesion (glue, hairspray etc) or use a brim or raft.
| Date published | 04/10/2022 |
| Precio | $6.00 |
This dragon is so cute! Love that it stands up.