Now Available Again for MEMBERS ONLY to purchase!!! 

Thanks to everyone who voted for this little character for January's Exclusive! It is mostly print in place with pop-in wings that were designed for an easy layer color change. So the body and wings can be printed in 3 separate colors without the need for a multi-color printer :)

Printing Tips and Info: Most of the PLA below can be found on my Amazon Page HERE
- I tested this one at 75% for functionality and printability. The tinier you print, the more fragile they could become. Keep in mind silks are more delicate.
- I have been asked a ton about my settings, and I use the same settings as a baseline for designing and printing... 15% infill, 3 walls, .12 or .16 layer height and NO Supports ever needed, Generic PLA if you are operating a Bambu machine.
- 100% Monarch Butterfly : Bambu Sparkle Black , Amolen Silk White , Hatchbox Orange and Dark Yellow
- 125% Butterfly: Cookiecad Unicorn , Stronghero Voodoo , Amolen Silk White, Giantarm Rose Pink
- 145% Butterfly: TTYT3D Fast Changing Rainbow , Locyfens Blue/Green , TTYT3d Copper
- The wings have an easy pop in feature. align the notch and gently push.
- Great adhesion always helps make a successful print. I use a very thin layer of Disappearing Purple Glue.

Happy Printing- Dan