Fancy Clock Key
Fancy Clock Key
3D
Published 2017-05-19T15:27:15+00:00
I needed a key to wind up a 400 day or anniversary clock and didn't have one the correct size so I made one. Extra thick to keep from cracking side walls around where the clock stem fits inside. This key is, and was made for an exposed stem where it does not go through the face of the clock. Printed mine out at 96% for a good fit on my clock.
I printed this with support with the round end pointed straight up. If it is to big for your stem then you can scale it down to fit your needs. At 100% it measures71.00X14.14X53.24 MM. I down sized mine to 96% for a good fit on my clock. It was made extra big for the thickness in the side walls to keep them from cracking when you wind your clock. Use at your own risk!
| Date published | 19/05/2017 |
| Tecnología | FDM |
| Complejidad | Fácil |
