FanRegulatorKnobCap
FanRegulatorKnobCap
3D
Published 2018-01-29T11:34:00+00:00
This is cap for fan's regulator with replaceable cap so that it can be replaced with different color or glow in dark material. It works well with PLA and ABS both. Blue color shown in ABS and Floroscent Yellow is PLA while White shown in glow in dark material.
Specifically glow in dark materila will be better for this part to help elder persons to reach upto fan regulator.
I will try to make variants for the same with different ideas, knerling is already added in v6 version. And other ideas comming soon for entering into design challenge for home spare parts section so you may suggest ideas to be implemented or vote.
0.2mm layer height with any %age of infill with more than 20% is fine but because this is very small part, you can safely print with 100% infill specifically for glow in dark to get better results of glowing.
| Date published | 29/01/2018 |
| ¿Cuándo tiempo lleva? | 20 - minutos |
| Cantidad de filamento | 6 |
| Dimensiones | 31x31x20 |
| Tecnología | FDM |
| Complejidad | Fácil |
| Sin apoyo | YES |