FCX24 +10mm Links
2,709
visitas
191
descargas
2
colecciones
0 comentarios
Cargando comentarios... 
FCX24 +10mm Links
3D
Published 2022-08-18T08:25:57+00:00
2
0
Add to Collection
Descripción
These links will extend the wheelbase of the FCX24 by 10mm via longer upper y-link and lower links. They can be used in the front or rear (the stock links are the same length on both ends). There are options for straight and high-clearance lower links. Transfer all stock hardware. No other hardware is needed. The holes in the wider part of the y-link should be cleared out with a 1.7mm or 1.8mm drill bit.
You will also want to use a longer driveshaft and add shock mounting holes on the shock towers to correct the ride height (https://www.myminifactory.com/object/3d-print-240231).
Licencia
Detalles de impresión
- PETG recommended
- 100% infill
Información técnica
| Date published | 18/08/2022 |
Más información
Archivos