Figure - Greek Mycenaean Heavy Infantry 1500 B.C. Palace Guard!
$8.99 Figure - Greek Mycenaean Heavy Infantry 1500 B.C. Palace Guard!
3D
Published 2021-11-26T14:32:12+00:00
Ancient Greece
This is a Mycenaean warrior in Dendra panoply 1500 B.C.
The Dendra panoply or Dendra armor is an example of Mycenaean-era panoply (full-body armor) made of bronze plates uncovered in the village of Dendra in the Argolid, Greece, dating from 1400 BC.
Things to know about the Mycenaean Civilization:
The Mycenaeans existed for roughly 500 years, from approximately 1600-1100 B.C.
They were the last of the Late Bronze Age cultures in ancient Greece as well as the first of the more advanced cultural systems.
They placed a high priority on their military prowess and honoring the mighty warriors of their day.
The Mycenaean civilization was one of great military conquests and war heroes and has contributed to much of what we typically think of as “Greek”.
The events that brought about the collapse of this powerful culture are lost to history, at least for now, but the legends of their military strength live on. For the Greeks, this era originated many of the heroic stories and tales that are still being told to this day.
Print it, Paint it and create your story!
Remember to tag us on Instagram or post your creation in our Discord or Facebook Group.
Linktree: linktr.ee/Minormous
Discord: discord.gg/pNNXQFkjGG
Facebook Group: facebook.com/groups/minormous
Product Details:
The figure is 1:24 scale. It was created to be as historically accurate as possible.
It is created with realistic proportions.
This model comes fully and professionally Pre-Supported!
It comes in parts for easier printing. It will require assembly.
Included Files:
-Not Supported Stl Files.
-Pre-Supported Stl Files
-Lychee source files for the Pre-Supported Stls.
Note that a minor post-process may be needed for a perfect fit depending on the resin and the shrinkage percentage, etc.
FAQ
Q: Can I change the scale of the model for more heroic proportions?
A: The proportions will stay the same but the model will appear bigger thus it will resemble a more heroic look. The figure is 75mm to the eyes. To make it 80mm or 85mm to the eyes, you will have to scale the model 106,67% and 113,33% respectively.
Q: My model is smaller when printed why?
A: It is probably because of the resin shrinkage percentage. Make sure to scale the model up according to the resin shrinkage percentage. For example, if the resin shrinks 5%, then you will have to scale the model (all the parts) in the slicer to 105%.
Q: My model appears small when importing in the slicer. how to fix that?
A: Scale the model up 10 times or at 1000% and the models should be at the correct size. 75mm to the eyes.
Q: My model appears red when importing in the slicer and it says that there are issues with the topology. Why?
A: This is most likely a glitch since we have already test printed our models multiple times with no issue at all. Join us on Discord and share your experiences.
We recommend:
*
Soak the print in warm water or alcohol for a couple of minutes for easier support removal.
*
Remove the supports before curing the print.
*
Be extra careful around thin parts to avoid breaking the print
*
If you plan to paint the print, make sure to use a primer first.
| Date published | 26/11/2021 |
| Precio | $8.99 |
| Sin apoyo | YES |