Floating Table Top - Tensegrity
Floating Table Top - Tensegrity
3D
Published 2020-03-31T09:50:15+00:00
Inspired by various models on the subject of tensegrity, I have designed another one ...
... a construction that represents a conventional round table. Dimensions: tabletop Ø150mm, base Ø 80mm, height about 140mm.
To increase stability there are 4 clamping points, instead of 3, which also would have been enough. As tensioning threads I took a nylon thread Ø 0,35mm. The attachment is extremely tricky and for people without endurance only conditionally recommended ;-) Dental floss also does the job. In any case start with the middle parts. The distance there in the thread area should be about 20mm. I did it. You can do it too!
Then insert the middle parts into the table top and the table foot ... into the holes provided. To ensure a good fit, the fitting accuracy is very tight. It may be necessary to correct the fit with a cutter knife or sandpaper. Then apply superglue.
Have fun printing and looking at it ... it’s somehow fascinating!
https://youtu.be/zarCq6YIUgU
Keep well!
Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Resolution:
0,2
Infill:
20%
Filament_brand:
Prusa
Filament_color:
Galaxy Black, Silver
Filament_material:
PLA
| Date published | 31/03/2020 |
| Dimensiones | 150 x 140 |
| Sin apoyo | YES |