Forklift Kit Card with Pallet
Forklift Kit Card with Pallet
3D
Published 2024-05-01T17:27:27+00:00
Want to sell this in your 3D printing shop? Check out my Patreon for licensing!
https://www.patreon.com/Cheezylabs
Check out my filament!
https://www.amazon.com/dp/B0C1GJDDZC?ref=myi_title_dp&th=1
I created this little kit card that assembles into a little forklift - complete with a mini palette!
The forks can slide up and down as well as tilt. Wheels should move freely.
Printed on a Prusa mk3 with the Palette Pro 3.
No supports needed (they are built into the model)
Finished model is pretty small - about 50mm in height.
I've included files in multiple parts for each color as well as a single color version.
For those of you without multicolor printers, I included one file with all the parts (without the frame) so you would need to break them apart yourself for each color you want. However, the tires and rims must be combined as one since there is 0 tolerance between them.
Please note fitment may be different for different printers. Everything should snap in place, aside from the cabin which may need to be glued since the pillars are thin.
Some tests show the steering wheel and seat may be loose depending on your first layer Z height because of elephants feet. Adjusting that may help with proper fitment.
I'm always open to any suggestions for changes/improvements. If you have any, please leave them in the comments.
Happy printing!
A perfect first layer is very important - especially in this model.
No brim needed.
| Date published | 01/05/2024 |
| Sin apoyo | YES |