Gep-rc Mark3 3dprinted tpu skins
Gep-rc Mark3 3dprinted tpu skins
Published 2022-11-28T16:14:47+00:00
Different parts have arrived, the build continues. This page will update as I go.
The Mark3 is a sexy bottom mount frame from Gep-rc. I have two of these frames, one is solid frame true x and the other is stretched x with removable arms. My parts fit both. Ive included motor skirts, skids, fc guards, buzzer mount and antenna mount fit to this frame. The buzzer is a vifly buzzer with its own power supply. I have designed this build around the speedybee stack. There are two versions of the fc guard, one with a usb hole and one without. They can be mirrored in the slicer to make a pair of compatible parts for your build. If you have the sppedy bee stack there is a button that lets you manipulate the fc through the fc guard. The cam mount is made to fit a caddex ratel starlight cam which is 19mm, the frame is 28mm wide. This is a build in progress but Im waiting on motors I bought in august from a popular vendor... The button for the buzzer was printed in pla but probably would be best printed in resin. I will update files as the build progresses but Ive been sitting on this one for a while.
I dont use supports. Ive indicated the orientation for slicing and will update with more pics. I prefer a .5 mm nozzel.
Date published | 28/11/2022 |
Sin apoyo | YES |