GNSS GPS BOX with Charger Port for PowerHobby / SkyRC GSM020
GNSS GPS BOX with Charger Port for PowerHobby / SkyRC GSM020
3D
Published 2021-04-12T11:50:47+00:00
Box or Mount for GPS GNSS Powerhobby or SkyRC GSM020 models with charging port. Designed to be installed inside an RC vehicle, with a opening to observe the status LEDs and a opening to load the GPS without having to remove it.
It can be printed on PLA or PETG.
If the printer is properly calibrated, no adjustment is required, the GPS enters without difficulty and is perfectly adjusted. The 4 screws that are required to put the cover are of the M2 x 5mm type.
Print Data ( PLA ) :
Layer: 0.2
Shell: 0.85
Infill: 30% - 50% (More resistance in case of impact)
Support: Yes. (I recommend it so that the loading port is not deformed.)
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
30%
Filament brand:
3D Solutech Real Black
Filament color:
Black
Filament material:
PLA
Notes:
Note: The printer is adjusted and does not require any adjustment on the part to print. If not, you may need to scale a little +/- so that the piece allows the GPS to be inserted smoothly and fairly.
| Date published | 12/04/2021 |
| Sin apoyo | YES |