Bundle Package for new tribes members! Join tribes in November to get the Witch Plateau and Hag and then use your members code and get this product 40% off!!

 "The Witch of Haunt Wood Mine" Available on Tribes as a split release during September, October, & November. This Product includes the entire September and October compilation! This file Includes: 4 Tall Mountains, 3 Short Range Mountains, Giant Plateau, 6 Buildings, Solid Fill variations, and free-form palisades!

Miners Barracks: with granary and watch tower. Granary can be stand alone and used with parts from the Granary we released a couple months.
Witch House: This is a 2 story A-Frame, towers are large enough for 1 mini. It is cut into 3 main parts, but has a 5 part option to avoid 24hr prints. 
3 Mountains (with caves):There are 3 mountains. The bottom layer is cut so it can be used as rooms or supports underneath the plateau. Top levels of the mountain can be used as scatter rock options. I will add more to this in October.
**2 Foot+ Plateau  (30+ inch footprint):**A giant Plateau with a foot print around 30 inches. Over 2 feet of playable top area, basically an end table. Optional mine entrance in images. Sections glue together with bars that are much more snap into place than the option supports for the scriptorium plateau. It is tighter because they have to be used on this larger plateau. Contains Alternate road ramp for the plateau.

Solid Fill variations of all mountains and buildings for scaling to print 6mm-18mm models

1 More Mountain and 3 Low range Mountains: we have some more filament guzzlers here. This features some really long winding and shorter rock formations that can be used as a settlement boundary or rough terrain obstacles. This month we're going to be getting into some of the payoff from the last few months. What I'm after are settlements where the fortifications are really a mix of man made and natural features. The shorter mountains are about the height of an average palisade. As far as bridges go it looks like my scaffolding set works just fine for it so I will not be adding extra. The scaffolding set features narrow walkways as well as winder planks and feature 2/4/6 inch risers. The mountain includes a large cave area as well. Diagrams show alternate parts that can be used for making shorter lengths.

Windmill. Simple windmill elevated on a rock foundation, It has an open door with one playable level. Blades come in resin and FDM versions. The Body is set up for FDM support free printing. 8X8 build area recomended.

The Palisades

These walls are wide based in the middle but come to pointy ends as you can see in the top-down view above. The idea here is to allow you to mix walls, buildings , and mountains to make your settlement fortifications or ruins. The palisade have 3 designs with 3 style variations each. This includes a scaffolding option.

The Toll Gate

We have full working doors with enough space for most wagons. It is designed to go with our roads. If you don't have them the ramp parts from the scriptorium will work as ends. Ladders will allow you to latch mini bases in there if ladder movement is part of your game. Free form palisades can go on the sides.Resin options available for doors and smaller bits.

The Guard Tower

This is a proper and beefy 3 story timber guard tower. It features a base with and without the palisade starter.