Hotwheels Subaru WRX STI (2016) Display Base
Hotwheels Subaru WRX STI (2016) Display Base
3D
Published 2022-02-22T09:28:53+00:00
Description
A base for Hotwheels Subaru WRX STI (2016), it should work with the Subaru from the Fast and Furious set and the Boulevard set.
The display base is separated into 3 parts, name plate, the base and the back plate.
Print Settings
Nozzle size = 0.4 mm (minimum, smaller better)
Layer height = 0.2 mm
Filament change layer for colours on backplate:
1) Starting colours will be the base colours for the "STI" pattern (Mine is red)
2) Layer 12 (Base plate colours surrounding the "STI" pattern, mine is blue)
3) Layer 19 ("Subaru Rally Team" lettering)
Filament change layer for colours on name plate:
1) Layer 5 (Lettering on name plate)
Assembly
The car is tied with metal wire through the display base holes, the wire will need to be slide between the wheels and the metal body.
Back plate should slide in nicely into the display base. The name plate might need some trimming to the side to fit into the box.
| Date published | 22/02/2022 |