Hotwheels Toyota AE86 Display Base (TRD Theme)
Hotwheels Toyota AE86 Display Base (TRD Theme)
3D
Published 2022-04-15T11:12:56+00:00
The display will fit all Hotwheels release of the same casting. It is not tested with the older AE86 casting, if you want the base to fit that casting please send me the dimensions indicated here: https://imgur.com/5T6mb2L
The display base is separated into 3 parts for easy printing and colour swap. The parts are:
1) Base
-BaseV2.STL
2) Base back wall:
-BoxBackAssem.STL
Print Settings
Nozzle size = 0.3 mm (0.4 should be printable but smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "BaseV2":
1) Start (Left stripe colour, mine is in yellow)
2) Layer 6 (Middle stripe colour, mine is in orange)
3) Layer 11 (Right stripe colour and TRD logo background, mine is in red)
4) Layer 16 (Overall base colour and TRD lettering colour, mine is in white)
Filament change layer for colours on "BoxBackAssem":
1) Start (Background of the wall, mine is in white)
2) Layer 9 (Left stripe colour, mine is in yellow)
3) Layer 14 (Middle stripe colour, mine is in orange)
4) Layer 19 (Right stripe colour and TRD logo lettering, mine is in red)
5) Layer 24 (Racing Department lettering colour, mine is in black)
Assembly
The car is tied by wires through the hole in the base
Back plate should slide in nicely into the display base.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/
Custom display base designs are available for $5! Contact me to discuss what you want!
| Date published | 15/04/2022 |