Ice Lantern Mould (Collection of 15)
Ice Lantern Mould (Collection of 15)
Published 2019-12-05T00:05:12+00:00
Here's a collection of ice lantern molds, a total of 15 different designs.
Creating one is easy:
1. Print a design of your choice and fill it with cold water.
2. Let it freeze to form an ice shell (outside or in the freezer)
3. Remove the lantern from the mold
4. Insert a candle and enjoy the warm glowing warming glow!
A few points to consider:
Using vase mode and a larger nozzle or extrusion width (0,8mm and up) is recommended to achieve water tight mold with a decent print time (or just print slightly scaled down!)
Don't freeze it completely solid as you risk breaking the mold as the ice expands too much.
You can use hot water to heat the mold and better separate them.
Vase mode, big nozzle and no cooling recommended
Date published | 05/12/2019 |
Sin apoyo | YES |