Insignia NS-DCR30D3K USB 3.0 Advanced Memory Card Reader Holder
Insignia NS-DCR30D3K USB 3.0 Advanced Memory Card Reader Holder
3D
Published 2020-05-14T10:29:15+00:00
I have designed a mounting system to hold Insignia NS-DCR30D3K USB 3.0 Advanced Memory Card Reader, so it's not moving around when you're trying to use it. To fasten the mount you can use double sided tape, use the provided holes, or use the lower brackets to fasten onto a wire rack. Use a M3 screws or make the hole larger to use a bigger screws.
Link to where the card reader can be purchased: https://www.bestbuy.com/site/insignia-usb-3-0-advanced-memory-card-reader/5787403.p?skuId=5787403
Note to content creators (YouTube, Patreon, Educators, etc). Yes I understate that you are "technically" getting paid in the backend for creating content & thank you for creating that content. So to expand everyone's knowledge, you have permission to use this design in your content as long as you: State that it is not yours & acknowledge who designed it. Provide a link to where you got it from, so others can download & enjoy it as well.
BTW if you like my design, please don't forget the click the "like" button & show you appreciation.
Thanks & Enjoy!
I printed it on blue painter's tape that I prepped with isopropyl alcohol to remove the wax film. Using 3D Solutech PLA black filament the initial bed temp was 60C, nozzle temp 205, no cooling fan, & print slow on the first layer (I had it at 25). On the 2nd layer to finish drop to bed temp 50C, nozzle temp 205, cooling fan high, & increase print speed back to normal.
| Date published | 14/05/2020 |
| Sin apoyo | YES |