Interceptor Saber Hilt - Proffie+Neopixel Compatible (LGT Core / Pattern)
Interceptor Saber Hilt - Proffie+Neopixel Compatible (LGT Core / Pattern)
3D
Published 2021-11-09T08:52:12+00:00
Custom saber hilt ready for electronics and blade. This fits the LGT core module. Pictured is the LGT Proffie Core and 1" Neopixel blade from Darkwolf Custom.
I specifically recommend a 32" blade - normal filaments do not give the hilt enough weight for a 36" blade to feel balanced in the hand. If you are printing metal fill or other high-density filaments this may not apply.
Also requires 4x M4x6 or M4x8 set screws to keep the blade in place.
From testing this hilt can stand up to light dueling / swinging without issues.
Slicing is validated in Prusa Slicer. Other engines may require sending this to Netfabb or another repair tool first.
The threads are backwards but I noticed this last minute and was unable to fix it.
License caveat: This is BY-NC-SA, but using this file purely for its measurements and discarding the mesh is allowed unconditionally (hole sizing, hole patterns, overall length, diameter)
Both halves are able to print without supports or brim, at leats on my Prusa Minis.
I recommend manually painted supports for just the rim of the lower half - you will have a bad time if you let it generate supports into the pommel.
I also recommend high infill - yes, even 100%. You want high weight to counter-balance the blade.
| Date published | 09/11/2021 |
| ¿Cuándo tiempo lleva? | 16 - 24 minutos |
| Sin apoyo | YES |