Intex Ultra XTR Frame leg bracket
2,895
visitas
86
descargas
0 comentarios
Cargando comentarios... 
Intex Ultra XTR Frame leg bracket
3D
Published 2020-01-02T18:13:48+00:00
6
0
Add to Collection
Descripción
I needed a bracket to hold some of my pool stuff to the frame and this is what I came up with.
I also have the holder for the valves for the pump and such too.
It needs to be printed in PETG, ABS, or ASA
(for UV protection)
I tested PLA and it got weak and warped in the sun.
It uses a 2" long 1/4" bolt and nut,
I recommend a Stainless steel ones.
If you use stainless steel bolts please use anti-seize on the bolts
You can also attach a 1.5" PVC pipe to the bracket and it it for the pool nets and etc if you want.
Licencia
Detalles de impresión
Layer Height: any
Perimeters: 3 minimal I would do 5 for extra strength
Infiill: 20% or more
Información técnica
| Date published | 02/01/2020 |
| Sin apoyo | YES |
Más información
Archivos