KIDS RACING SOAP BOX
KIDS RACING SOAP BOX
3D
Published 2022-01-11T09:37:40+00:00
A nice soap box model, with a removable driver, for hours of fun!
Two different drivers (happy and neutral)
Really easy to print. 100% support free
Parts are already place in the right orientation
Total length: 163mm (almost 6.5 inches)
Wheels are assembled with (4x) M4x16mm screws. Holes are self threading, so if you wanna use 8-32 instead, it is absolutely possible! ;p
Once assembled, tighten the wheels until they can't move anymore, and then unscrew half a turn to have the perfect play for the wheels to spin freely.
If done correctly, the race car will roll very well and go on a long distance.
I suggest TPU for the tires. They are slick tires, so its pretty easy to print them in flexible material. PLA can work too, but on a hard or wooden surface they will tend to slide as they have less grip...
The driver can be removed, just like the good old Fisher price toys.
Have fun printing and racing!!!! :p
NO COMMERCIAL USE ALLOWED
3D PRINTING SETTINGS
On the pictures:
0.2 layer thickness
4 walls, 15% infill
60mm/s
As always, this is only a suggestion. You know your printer better than anyone else. ;) Model is pretty easy to print.
Be sure to do the helmet pretty slowly. This will give you the best results on the overhangs.
| Date published | 11/01/2022 |
| Sin apoyo | YES |