KS2AZT15 – Aztlan LED Wall
897
visitas
197
descargas
13
colecciones
0 comentarios
Cargando comentarios...
KS2AZT15 – Aztlan LED Wall
3D
Published 2022-08-22T08:33:56+00:00
30
0
Add to Collection
Descripción
Aztlan LED Wall started as a request from Collin Larson for his massive Aztlan Build. Collin asked if we had one, and I told him that while we didn’t at the present, we would fix it immediately. Four hours later he had the first of 4 revised prototypes needed to perfect this print. Many thanks to Collin for helping bring this one to life.
Licencia
Detalles de impresión
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
Información técnica
| Date published | 22/08/2022 |
| Sin apoyo | YES |
Más información
Archivos