KS3SHP14 – Chobanu Class Monowing
$1.00 KS3SHP14 – Chobanu Class Monowing
3D
Published 2022-08-03T08:48:29+00:00
Check out our patreon where we publish our patron requests and other awesome sets like this one.
Major Stephan Chobanu was a pilot with the Ukrainian Airforce. He took off and fought impossible odds to allow his squadron to escape and redeploy during the invasion of Feburary 24, 2022. He had already been retired once from the Air Force, but felt he had to return in light of the danger of his country. His squadron survived, and so will his memory forever.
The Chobanu Class Monowing honors his sacrifice
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 03/08/2022 |
| Precio | $1.00 |
| Sin apoyo | YES |
Picture provided by Colin Christenson.