Luffy Gear 5 Nika Awakened - Light Plate - Sun Catcher - One Piece Wall Art
Luffy Gear 5 Nika Awakened - Light Plate - Sun Catcher - One Piece Wall Art
3D
Published 2023-08-22T09:52:37+00:00
- Luffy Gear 5 Awakened Devil Fruit - Nika the Sun God - One Piece
Uses: Wall Art, Lithophane, Sun Catcher, Light Plate Replacement
I created this to replace the glass plate covering a recessed ceiling light.
This plate is 222mm x 222mm and is 4mm thick
The size is easily adjusted. Just scale the x and y in your slicer and disable uniform scaling if you want the thickness so stay the same.
I've included the .3mf file so you can more easily make edits
I've also included the image files I used to create this model. I've included the image file from every stage of editing to make remixes and edits easier for others.
Software Used: - Photoleap
- GIMP
- Inkscape
- Nomad Sculpt
- CookieCad
If you want to create your own unique remix of this super easily, go checkout CookieCad. This program lets you upload an image and create a stamp or imprint design. Originally intended for cookie cutters I used it to create this and a few other styles of this image in lithophane-esque round plates. You can use the images I included to upload to CookieCad.
My Printer: Ender 3 S1 Plus
Material: PLA (Eleego Brand - White)
Print Temp: 200c
Speed: 55mm/s
Layer Height: .2mm
Infill: 100%
Build Plate Adhesion: Skirt
Slicer: Cura
Supports: None
Z Seam: Sharpest Corner
LEVEL/TRAM YOUR BED
As with any flat print that extends to the edges of your print bed leveling/tramming is critical here. Example - look at the upper left corner of this print. The back left corner was too low. The first few layers didn't adhere right but it looked like it'd be fine, until the inner frame started. It doesn't look awful, but in a print where the beauty is how clean lines filter light, a crumpled corner isn't great.
Infill Note: Most sources on Lithophane style printing say 99% is sufficient. I didn't read that until after I printed this so can't speak to that personally.
Print Time: 21 Hours
| Date published | 22/08/2023 |
| Cantidad de filamento | 200g |
| Dimensiones | 220mm x 220mm x 4mm |
| Sin apoyo | YES |
