3D model description
Printed with PETG but can be printed with ABS or PLA.
Electricity is Dangerous, pay attention when assembling!!!!!!!
For all electrical parts needed look photos
You need a LED lamp of 2w or 3w
There are 2 "base" model, with diameter of 29mm & 33mm, for different lamps diameter.
Use a Nozzle with big diameter
Nozzle = 0.4mm, printing time = 60h
Nozzle = 0.6mm, printing time = 30h
Nozzle = 0.8mm, printing time = 16h
Recommendation for 0.8 Nozzle printing:
1- Adjust the gap between Raft and model to be easley detached, for 0.8 Nozzle I put it to 0.45mm
2- Support infill ratio 20% or less if possible
3- Support Horizontal Offset = 1.3mm
This is horizontal distance of Support with the adjacent wall of the model.
Files which named Shade 1 & 2, must be printed in "vase mode", (inside is empty!) they are used inside of lamp to dimming light or color it.
File named Cap is used inside of lamp like Shade 1 & 2.
Use Raft & Brim with support for all parts
For shade 1&2 use only Raft & Brim!!!! Of course In "Vase mode" you can not use support!!!
This STL is for personal use only.
Do not copy or redistribute it.