Master Painter - Modular 3D Printable Paint Rack
$26.00 Master Painter - Modular 3D Printable Paint Rack
3D
Published 2024-04-22T08:54:29+00:00
The Master Painter is designed for all hobbyists, tabletop gamers, 3D makers, and painters. The idea behind this project is to create a customizable paint rack that you can assemble like LEGO or other building blocks.
To make it easier for everyone with a 3D printer, the design goal was to make it printable without any supports and strong enough so that it doesn't break, even with cheap PLA material.
The Master Painter is the result of all this and can be much more.
I aim to make it the most advanced and best Paint Rack or Paint Shelf on the market.
FDM Printer is required.
All parts are already tested and 3D printed to ensure that everything functions as expected.
You will receive all Master Painter STLs, as well as all stretch goal STLs ans future updates.
You will receive over 110 STL files for the Master Painter, along with all stretch goal STL files and all futures updates.
After our successful crowdfunding campaign on Gamefound, the Master Painter - Paint Rack is now available on MyMiniFactory. You can find the Master Painter crowdfunding campaign here.
https://gamefound.com/projects/3dotakuprints/master-painter-paint-rack
You can find tutorials on our YouTube channel:
https://www.youtube.com/channel/UC5tkPPqIy0F19g7wF6aYk3w
Randy from Forged Realms has already printed the Master Painter and has made some videos about it on social media. Check out his Linktree for more information.
https://linktr.ee/randysackett
If you want to learn more about us, here is our Linktree:
https://linktr.ee/3d_otaku_prints
Printer Settings
Here are the Print Settings what i used for my paint rack and test prints.
Layer Height: 0,16 mm
First Layer: 0,12 mm
Walls: 2
Top Layers: 4
Bottom Layer: 4
Infill Density: 20%
FDM Printer is required.
Minnimun print bed dimensions that your need for this Project:
(X)200mm x (Y)215mm x (Z) 100mm
Material
I used SUNLU recycled PLA for most of the test parts and for my own paint rack. Since it performs well with this economical material, you should encounter no issues with any other PLA brands. Additionally, I tested printed parts with SUNLU Meta PLA, SUNLU PETG, and SUNLU ABS, all without any problems.
If you choose to use PLA for the Snakebite connectors, there is a possibility that they may break after 2-3 uses.
For more frequent usage, I recommend using PETG or ABS for the connectors.
| Date published | 22/04/2024 |
| Precio | $26.00 |
| Sin apoyo | YES |