Masts, Sails and Ratlines: First Rate Ship of the Line
$6.00 Masts, Sails and Ratlines: First Rate Ship of the Line
3D
Published 2022-09-26T14:00:42+00:00
Masts, Sails and Ratlines: First Rate Ship of the Line
Presupported
Included is a set of masts with battle sails (main yard courses rolled up) and detailed shrouds with ratlines. These parts are sized to fit most first and second rate ships, as well as some third rates.
Note 1: The shrouds can be trimed both in length and height after printing, by trimming one shroud at a time from the fore-edge and one ratline at a time from the top - make sure you test fit before gluing.
Note 2: The staysails feature a groove on the long edge to facilitate attachent. Complete the standing rigging first, then align the painted staysails with the appropriate foremast stay and use a dab of thin cyanoacrylate to affix - if more than one staysail is featured, they may be glued to one another after fixing to the stays for additional strength.
For more STL miniatures and accessories, please visit Micron Miniatures' store on MyMiniFactory.
Cheers!
Micron Miniatures
Designed in Australia - Printed on Earth
| Date published | 26/09/2022 |
| Precio | $6.00 |
| Sin apoyo | YES |
Smallest sails on masts are not printed well, they have very thin parts and were torn. Do you have any recommendation on printer settings to correctly print these masts?