Mavic 2 Pro skids
Mavic 2 Pro skids
3D
Published 2020-06-20T07:05:10+00:00
Mavic 2 Pro skids designed for easy hand catch landing while on a boat or other drifting object. Grab a leg and flip the drone upside down to force kill motors or remote stick kill position.
The tops on the handles are bumped for added grip, the underside is flat and grooved for more surface grip while landing. Skids do not interfere with drone sensors and only weigh about 70 grams for the set. Bonus you can glue fabric or tape the mounting points for extra protection on the rotor arms from scratching and a snug fit.
To attach, fold the front arms slightly back, position the front skid mount onto the arm and extend the arm to final position, bringing the back skid mounting slot onto the back rotor arm. The skids are secured to the drone by the arms unfolded, no hardware, easily removable, 1 2 3.
Enjoy easier landing on your boats :) and yes I intentionally printed in bright orange for visibility on the lake.
Have a mod you want printed for the mavic? message me and maybe I can make it happen
straight forward, position orientation on the bed as it would be on the drone. My weight of 70 grams (both) is based on a 15% infill, print hot for good adhesion (cant be delaminating when you need to flip the drone if you choose to)
| Date published | 20/06/2020 |
| ¿Cuándo tiempo lleva? | - 240 minutos |
| Cantidad de filamento | 70grams |
| Dimensiones | 164mm x 32mm x 120mm |