Mini Pai Sho Set
Mini Pai Sho Set
3D
Published 2021-09-24T08:35:35+00:00
This is a Pai Sho set as seen in Nickelodeon's Avatar: The Last Airbender. This is about as large as you can print the set on a good sized hobby printer without cutting up the model. For a full-sized set, you can double the dimensions and split the board into quarters.
The tiles shown in the pictures were printed with a .38mm line width. The only tile that is not fully captured at that resolution is the lotus tile. For this reason, I recommend you print the tiles with a .2mm nozzle (unless, of course, you are printing this with a wood-filled filament as I did).
The included file for the tiles represents the tile set for one player, so it will need to be printed twice. This is not set up for multi-color prints. I encourage someone to remix this to accommodate for that, as painting the tiles takes quite a bit of time.
Printed with Hatchbox Wood PLA (light and dark) with a .38mm line width, .2mm layer height on the Artillery Sidewinder X1.
The tiles took me roughly 5 hours per batch and the board took about a day.
| Date published | 24/09/2021 |