Mister Lamp-Ion
Mister Lamp-Ion
3D
Published 2019-08-29T16:25:40+00:00
Mister Lamp-Ion
Pretty easy to print and assemble.
I use this kind of RGB LED with controller and remote : https://www.wish.com/product/5d4c28c9cd55ef3ce1d416e8
But a Led ring would be better ! (but i don't have and it works pretty well with strip)
See result here : https://youtu.be/bLdZwvTt8Xk
You'll need :
3 CHC screws M6*45
3 M6 ear nuts
1 CHC screw M5*25 and 1 ear nut
some wire
I print the glass with transparent PLA with 0.1mm layers, 10% infill, and no first layer (see photo).
LightProjector-Mount.stl and LightProjector.stl are just pasted.
OutterRing has been modified with blender (just two little bevels).
Created with Tinkercad so you can improve, modify, adapt it as you want : https://www.tinkercad.com/things/9h45IVbtQmy
!! This design is not original and greatly inspired by a similar lamp i've see in a shop !!
Resolution 0.1 (Light-Projector-OutteRring and Light-Projector-Window) and 0.2mm with 20% infill for the others parts.
| Date published | 29/08/2019 |
| Sin apoyo | YES |