Modern Minimalistic Umbrella Holder 

I had problems finding an umbrella holder. Most of them where umbrella stands, which would take up valuable floor space in my tiny apartment. And most wall holders where chunky and would take up to much wall space. Therefore, I designed this minimalistic umbrella holder which will fit perfectly in every corner. 

+ Fits in a corner 
+ Two part design enables you to choose the height 
+ Screwhead rail for easy installation 
+ Drilling Stencil with actual width size 
+ Enables you to store umbrellas, hicking sticks and other utilities 

+++ Mounting Information +++++++++++

This umbrella holder is optimized to be mounted with  4 x Screws with Pan/Round/Button/Truss Heads for optimal fit of the screw rails. The diameter of the screw head should be max 8,5mm | 1/3in and have a thickness of 3mm | 1/8in.

There is a STL file included to test your screw for the rails before printing the large one ("Screw_Control.stl"). Especially for the case if different printers have different tolerances. 

There is also a drill-stencil included as a STL file to check the if the width of the object fits your desired space and to be mark the drill spots ("Drilling_Stencil.stl"). The height of this object is 0,6mm to improve print speed, but can be changed as needed by scaling the z-axis in the slicer. 

+++ Printing Information +++++++++++

All objects included can be printed without supports if oriented correctly. 

It is recommended to print this object with 15% Infill and three wall perimeters. The main bodies can be printed with a larger nozzle to improve print speed. PLA can be used, however for areas of application where the object has to withstand environmental conditions it is recommended to use PETG or ABS. 

+++ Dimensions ++++++++++++++++

Top Piece: 10cm x 15cm x 3,5cm | 3.9in x 5.9in x 1.4in

Bottom Piece: 10cm x 15cm x 5cm - Inner height: 4,2cm | 3.9in x 5.9in x 2in - Inner height: 1.6in

If there are any questions, don't hesitate to comment! Specific modifications and adjustments are possible if requested!