Modular Vertical Honeycomb Copic Marker Stand
Modular Vertical Honeycomb Copic Marker Stand
3D
Published 2020-11-09T10:48:48+00:00
Note: Photos show the old logo, files will have new updated Katz Creates logo!
My ridiculous collection of Copic Markers needed a home on my new desk, so I designed it one! Since the desk space is somewhat limited, I thought the best way to go would be up! I also wasn't entirely sure how I wanted it to look, so I thought, why not have options?! Options are great.
This Modular Vertical Honeycomb stand comes with 8 different options for pieces you can use to build your own custom organiser. There are both desk standable options as well as floating wall mountable options. These can be used together as well, as seen in my configuration. There are also 'end' pieces if you want to introduce a bit of flair to your set up and have the edges have an irregular layout. There's a lot of variation that can be created here, so have fun with it!
These stands have been made to fit Copic Sketch Markers, but should fit most art markers, as well as a wide variety of art supplies. Want to use them for pencils and brushes? No problem! The usable diameter of the hexagons is about 18mm. Each stand has 24 slots, except for the Top and Bottom pieces which have 26.
To help with usability, there are also slots for 4mm x 1mm neodymium magnets on the sides, if you wish for your block of stands to keep together or be extra stable. Not a requirement to use them, but an option if desired!
Each block has two slots for screws up to an 8 gauge (imperial)/4.5mm diameter (metric) size to secure it to the wall. I would recommend securing at least one even if you have stacked on top of one another for extra stability!
Not a particularly tricky print, just a bit long! Unless you do not require the magnet slots, you must print with a maximum of .2mm layer heights or the slots will collapse and not fit magnets.
| Date published | 09/11/2020 |
| Sin apoyo | YES |