Nano particles and fume filter
Nano particles and fume filter
3D
Published 2019-01-09T14:06:12+00:00
This is an extension for the lack enclosure, it's a casing for a nano particles and fume filter.
It's composed of 4 parts assembled with M3 screw (the same as the ones used for the printer) :
- The interface, where are connected the filters (A P3R for nano particules, and ABEK1 for fumes). The interface in this model is specially designed for Moldex Easylock system. You have to redesign this part if you want to use other filters
- The Fan Casing part 1 & 2, are designed for inline fan (~30€), this one is designed for BLAUBERG Ducto 100. Room is made on part #1 for a 1.5mm O-ring seal.
- The exhaust
The filter must be placed inside the enclosure, you have to cut a small piece of Plexi for the exhaust part.
| Date published | 09/01/2019 |
| ¿Cuándo tiempo lleva? | 1800 - 2000 minutos |
| Tecnología | FDM |