Need for Speed Undercover Display Base (Maisto Porsche 911 GT2 and Nissan GT-R Police)
Need for Speed Undercover Display Base (Maisto Porsche 911 GT2 and Nissan GT-R Police)
3D
Published 2022-03-01T09:11:01+00:00
Description
A base for Maisto made Porsche 911 GT2 and Nissan GT-R Police, the base is designed with Need for Speed Undercover theme because the models I have was made for Need for Undercover back then.
Each display base is separated into 2 parts for easy printing and colour swap. The parts are:
1) Base
- BaseV2.STL (For Porsche 911 GT2)
- BaseV2 (Cop).STL (For Nissan GT-R)
2) Base back wall:
- BoxBackAssem4.STL (For Nissan GT-R)
- BoxBackAssem3.STL (For Porsche 911 GT2)
3)Name Plate
- Porsche911GT2NamePlate.STL
- NamePlate(SuperStateCruiser).STL
Print Settings
Nozzle size = 0.4 mm (minimum, smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "BoxBackAssem4.STL":
1) Start (Base background, mine is in gold)
2) Layer 19 (Flipped "Undercover", mine is in grey)
3) Layer 24 ("Need for Speed Undercover" lettering, building colours and police logo background, mine is in black)
4) Layer 29 (Police logo details, mine is in blue)
5) Layer 34 (Police logo details, mine is in grey)
6) Layer 39 (Police logo details, mine is in white)
Filament change layer for colours on "NamePlate(SuperStateCruiser).STL":
1) Start (Background colour, mine is in black)
2) Layer 9 ("Nissan", "GT", "R" outer line and "super state cruiser" lettering, mine is in grey)
3) Layer 14 ("R" lettering colour, mine is in red)
Filament change layer for colours on "BoxBackAssem3.STL":
1) Start (Base background, mine is in gold)
2) Layer 19 (Flipped "Undercover", mine is in grey)
3) Layer 24 ("Need for Speed Undercover" lettering, building colours and police logo background, mine is in black)
Filament change layer for colours on "NamePlate(SuperStateCruiser).STL":
1) Start (Background colour, mine is in black)
2) Layer 9 ("911 GT2" and Porsche outerline, mine is in white)
3) Layer 14 ("R" lettering colour, mine is in red)
Assembly
The car is tied by wires through the hole in the base
Back plate should slide in nicely into the display base, the flat plate should fit into the base nicely too. The flat base will need to be glued or have double sided to keep it from falling off the base.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/
| Date published | 01/03/2022 |
| Sin apoyo | YES |