Neko
Neko
3D
Published 2020-11-25T15:13:56+00:00
This is a keychain of the Sumikkogurashi character Neko. This is fan art based on the original characters owned by Sanrio. Use the file with the "-merged" suffix for printing. This was drawn using Microsoft 3D Builder and sliced using Ultimaker Cura software (v3.2). The 3mf file with the "um3-" prefix contains the 3D printer settings for Ultimaker 3. The G code files can only be used in Ultimaker 3 using TPU filament. There are 2 variants available here: small (30 x 30 x 50 mm) and mini (15 x 15 x 25 mm).
Important note: TPU filament was used to make this keychain. Using Ultimaker 3, disable retraction and keep the print speed below 40 mm/s for best results.
Observation: The ring for the TPU keychain turned out well when I sliced the drawing using Cura v3.2 but not later versions of Cura. I have yet to figure out the issue.
| Date published | 25/11/2020 |
| ¿Cuándo tiempo lleva? | 40 - minutos |
| Dimensiones | 30 x 30 x 50 |