nintendo switch joycon accessory organizer
4,591
visitas
221
descargas
1
colección
4 comentarios
Cargando comentarios...
nintendo switch joycon accessory organizer
3D
Published 2017-05-18T11:22:58+00:00
42
4
Add to Collection
Descripción
Update: the orignal model wasn't loading in cura properly anymore, so I have remastered the file to just be better.
This organizer slides on the back of the dock and can hold the joycon grip and 2 straps or just 4 straps.
I did this print at 0.2mm layer height it took 1 hour and 12 minutes.
Detalles de impresión
print it with the big flat side down, no need for supports unless you
Información técnica
Date published | 18/05/2017 |
¿Cuándo tiempo lleva? | 72 - 118 minutos |
Cantidad de filamento | 13 grams |
Dimensiones | 51.3x44.1x32.0mm |
Tecnología | FDM |
Complejidad | Medio |
Sin apoyo | YES |
Más información
Archivos
Had to adjust the size and rotation of the model in MakerBot Print. The Z-axis scale should be set to 51.3mm, with Uniform Scaling on, and the model should be rotated by -90 degrees on the Y-axis. Printed at 100% infill and 0.1mm layer height