OO/HO water crane Goathland / Hogsmeade LNER style
OO/HO water crane Goathland / Hogsmeade LNER style
3D
Published 2021-10-18T15:24:25+00:00
I made this one to be used on my Goathland/Hogsmeade module
(you can find all 3d parts for it here:
https://www.myminifactory.com/object/3d-print-goathland-hogsmeade-station-in-1-76-scale-oo-188007)
But can be used anywhere you want.
For the crane arm, print it flat (one side doesn't have the flange bit)
The mast is printed upright
as is the counter weight
For the water catcher thing, it prints bottoms up
All was then filed a bit and super glued up together
If you have a resin printer just use the SLA file to get the crane in one bit.
PS: i might add the little hand crank post in the future, but it's really too small for my FDM printer to make it.
Print Resolution : 0.12
Infill: as you wish but i recommend a 30%+ number (printed at 20% and there were some tiny gaps on the mast)
The mast took me 20 min
The counter weight and arm, approx 5-6 min
and about 10 min for the water catcher thing.
| Date published | 18/10/2021 |
| ¿Cuándo tiempo lleva? | 40 - minutos |
| Sin apoyo | YES |