PE Bender / Wire Bender for Hobby Model Kits
PE Bender / Wire Bender for Hobby Model Kits
3D
Published 2019-05-13T08:55:14+00:00
Designed this as a larger more versatile alternative over the small one I have at a fraction of the price.
There are two "bender" parts to choose/print. One is simple with flat edges for making long straight bends (works with thin styrene too). The other is more complex, similar to others on the market. The back side is intended for wire bending such as for grab handles.
You will also need 1 M5 bolt and 1 M5 Hex Nut.
Products used:
https://filaments.ca/?rfsn=4740568.a03b49
Note: Affiliate link above - I earn a commission from qualifying purchases at no additional charge to you just by using the links listed which helps support the channel.
To find more of my work, please check out my website: http://wrightbuilt.ca/
To download any of my own 3D designs, check out my design library: https://www.myminifactory.com/users/WrightBuilt.ca
Support me by Subscribing/Liking my YouTube channel, or by tipping me via MyMiniFactory (PayPal) here: https://www.myminifactory.com/users/WrightBuilt.ca
You can find my disclaimer here: http://wrightbuilt.ca/disclaimer-page/
Printed in PLA and PETG on the Prusa Mk2.5 MMU2 with 0.2mm default profiles.
For supportless printing, print the base upside down (side with the 2 chamfered edges down), and the other parts as oriented in the assembled picture.
| Date published | 13/05/2019 |
| ¿Cuándo tiempo lleva? | 300 - minutos |
| Dimensiones | 100x70x40 [mm] |
| Sin apoyo | YES |