Phone Mounting System - Version 2 From Vinovation
Phone Mounting System - Version 2 From Vinovation
3D
Published 2019-05-19T17:30:30+00:00 • Remix de Phone mounting system - Version 1 (old) - From Vinovation
Hi,
Thanks for visiting.
(NOTE: THIS IS AN OLD VERSION, PLEASE GO TO "UNIVERSAL PHONES AND TABLETS HOLDER - VERSION 3 FROM VINOVATION" TO DOWNLOAD NEW UPDATE)
This product is a mounting system for phones and an upgrade from Phone Mounting System - Version 1
FEATURES:
- It is designed to mount most phones
- The phone clamp can grab phones very firmly. And it is suitable for most phones.
- The clamp fingers were designed with an angle of around 45 degrees to prevent them from accidentally press the buttons on the side of the phone (New)
- The bolts and nuts included in the design are standard M4.
- Legs can be disassembled easily so it can be fitted inside a bag without taking too much space during travel. (See photo)
- Improved Design Appearance (New)
- Bugs fix (New)
Please refer to the assembly drawing attached for required parts and screws. You will also need two more rubber bands to complete the assembly.
Note:
Recommend to print 100% infill for most parts except the legs with 50% infill.
Please refer to the photos attached on how to orient the parts on the print bed, fail to do this may result in failure of the product during use.
END:
Happy Printing
Best Regards,
Henry
| Date published | 19/05/2019 |