Phrygian helmet with a figure
$4.50 Phrygian helmet with a figure
3D
Published 2021-06-17T08:12:04+00:00
This product includes the following items.
[Phrygian Helmet]
- Phrygian helmet.stl
- Phrygian helmet (with Crest and Plume).stl
- Crest.stl
- Plume left.stl
- Plume right.stl
- Cheekpiece left.stl
- Cheekpiece right.stl
- Cheekpiece left (Decorative).stl
- Cheekpiece right (Decorative).stl
- Chin strap.stl
[Greek Bust I Aeschylos]
- Greek Bust I Aeschylos.stl
- Bust Stand.stl
- Bust Stand (hollowed).stl
- Bust Stand Cap.stl
[32mm Figure of Phrygian Hoplite]
- Phrygian Hoplite.stl
- Sheath of Kopis(sword).stl
- Base.stl
We recommend printing with a resin printer.
The helmet and bust are designed on a 12-inch figure scale.
It may not be suitable for 12-inch figures of third-party products,
so please adjust the scale of 1 to 5% depending on the situation and print it.
The hinge part of the helmet should be connected to the cheekpiece using a 0.9mm thickness brass rod.
Depending on the 3D printer and printing environment, the hole in the hinge may shrink,
so please adjust the scale of the 3D model before printing.
The pre-supported version we provide may have different results for each printer.
so we recommend only using it as a reference during support work.
Please look forward to the future products of BLUE SAND! Thank you : )
[Note]
- The bust can also be printed with an FDM printer.
(Nozzle : 0.4mm / Layer Height : 0.2mm)
- Test printers : Anycubic Photon D2
- Test resin : Anycubic standard gray
[Update Notes]
- 08 / May / 2023
Modified Design of 3d model
Changed "the scale of the bust, helmet, and stand" to 12 inches
Added "a 32mm figure of Phrygian Hoplite"
1. Sanding recommended
2. Need to use glue
3. Resin printer recommended
| Date published | 17/06/2021 |
| Precio | $4.50 |
Turned out really well!