Pinning Tray - 7 pin
3,703
visitas
286
descargas
2
colecciones
0 comentarios
Cargando comentarios... 
Pinning Tray - 7 pin
3D
Published 2020-02-17T15:05:21+00:00
10
0
Add to Collection
Descripción
A simple pinning tray for gutting and repinning locks.
This shares the same basic layout as many other pinning trays, but with some variations.
- It has places for two cylinders, with cutouts on either side, where one has a slightly bigger diameter to fit larger cylinders.
- The "pin channels" are wider (Ø7mm) than on some of the other (3D printed) pinning trays I've found. Helps a bit when trying to grab the pins with tweezers.
- Slight difference to the partitioning that's common on many other trays.
Licencia
Detalles de impresión
Recommend printing at a 0.1mm Layerheight, but a coarser layerheight will still work fine (the print in the photo was printed at 0.15mm).
Infill: 5%
Wall count: 2
Top/Bottom: 4
Printed on a Flashforge Finder.
Información técnica
| Date published | 17/02/2020 |
| ¿Cuándo tiempo lleva? | 188 - 189 minutos |
| Cantidad de filamento | 26g |
| Dimensiones | 120x100x5 |
| Sin apoyo | YES |
Más información
Archivos
