Print-in-place glasses case
Sin soporte
Destacado
2,872
visitas
3
colecciones
0 comentarios
Cargando comentarios...
$3.00 Print-in-place glasses case
3D
Published 2023-02-03T14:09:14+00:00
17
0
Add to Collection
Descripción
Would you like to support my work? :)
Check out my full catalogue with exclusives, early access and commercial licences.
A print-in-place case for your glasses or sunglasses.
I used to break my sunglasses several times a year because I just stuffed them into my bag – so I designed a case to protect them.
The Design is provided with and without the ornament
Inner dimensions: 154 x 61 x 26 mm
If you have bigger glasses – you can scale the thing up
Detalles de impresión
- Required build volume: 170 x 170 x 80 mm
- Material usage: 120g
- Print time: 11h
- Material: PLA
- Print direction: stl is rotated correctly, check images
- Support: none
- Nozzle size: 0,4 mm
- Line width: 0,4 mm
- Layer height 0,2 mm
- Outer walls: 5
- Top/Bottom Layers: 5
- Infill: 100% - you can print with less but to ensure maximal stability 100% is recommended.
- Build plate adhesion type: If your printer or filament tends to warp – please use a brim to avoid layer shift as the result from warping – this will make the hinge unusable
- If you use cura you can use the feature “small feature max leight” under “experimental settings” and set it to 50mm – this way the hinge prints slower (not necessary, but recommended)
Información técnica
| Date published | 03/02/2023 |
| Precio | $3.00 |
| Sin apoyo | YES |
Más información
Archivos