Printable fpv drone motor skirt
Printable fpv drone motor skirt
3D
Published 2022-10-14T13:42:18+00:00
These are to be printed in resin. They are not meant to be the most durable parts but they do protect your motors frome sand and bando grit coming getting up inside your magnets. If you crash hard you might crack one but you wont get crunchy motors as easy and these are easy to keep extras in your flight bag. The example I show here in the green tpu is the Mark3 by GepRc. Really tight sexy frame. The motor guards/skids in this design are on top of the arm end and the tpu hangs down over the frame. This gives a little cushion between the motor skirt and the hard frame so when you tighten you motor screws it doesn't crush the resin. I made these to be as universal as I can while still providing a tight fit.
| Date published | 14/10/2022 |
