Ratchet clamp
10,944
visitas
2,066
descargas
32
colecciones
0 comentarios
Cargando comentarios... 
Ratchet clamp
3D
Published 2020-04-17T17:20:10+00:00
550
0
Add to Collection
Descripción
This version is based on my print-in-place ratchet clamp (https://www.myminifactory.com/object/3d-print-89776).
I use this clamps for small woodworking projects.
This time is printed in two parts (to avoid welding while printing) with minor assembly required.
It can be scaled up (tested at 130% and 180%)
Tested in PLA and ABS at 0.2mm layer heigth / 40% infill for more strength.
If you have tolerance problems with your print, adjust the horizontal expansion setting to -0.1.
Información técnica
| Date published | 17/04/2020 |
| Sin apoyo | YES |
Más información
Archivos
I opted for this version printing the 2 pieces separately. I didn't scale it up as I needed this smaller size. Printed pretty much as suggested. 0.2 layer height and 40& infill. S3D Said 33 minutes to print. Actual was 45m 34s and a bit over 1 meter of filament. Came out really nice and I"m doing about 3 more in different colors.