Rattlesnake, Print-In-Place Body, Snap-Fit Head, Cute Flexi
$3.95 Rattlesnake, Print-In-Place Body, Snap-Fit Head, Cute Flexi
3D
Published 2023-01-06T18:58:59+00:00
I'm very excited to share my articulated Rattlesnake. This snake features an Opening Mouth and a working Rattle with print-in-place beads! The base length is 25 inches, BUT that's just the starting point! With the snap-fit body joint system and the additional Body Extension Links, you can make it as long as you want! Each Extend Link adds another inch to the total length. Try different colors to add a striped effect.
See and Hear the rattle in action:
https://www.tiktok.com/@matmire_makes/video/7182736556611046702
This model is Pre-Supported (no added supports required).
Here is a quick video showing how to remove the Pre-Support, snap-fit the head, and assemble the body. https://youtu.be/5F43Vr5wi4A
Please, share photos of your makes! I would love to see them!
To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.
Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Furthermore, broken 3D printed parts can create sharp edges and/or points. Not recommended for children under 3.
*This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.
Includes 10 files:
Recommended
-Body (Front and Rear): Print-In-Place. Snap-Fit Together
-Head Top: Snap-Fit to Head Bottom. Pre-Supported!-Head Bottom: Snap-Fit to the Body Front. Pre-Supported!-Rattle: Separate so it can be printed in a different color. Snap-Fit to Body Rear. If the rattle beads do not print free from the surrounding material, you can use a pointed object, like a pen, to push them into the rattle. Print-in-place.
-Body Extend Link: Print-in-place. Add in-between Body Front and Rear.
Extras
-Body Aligned (Front and Rear) : Body links are all in a straight line. Gives more options for people with belt or large build volume printers.
-Body Rear wRattle & Body Rear wRattle Aligned: Rattle is pre-attached to the body, if you aren't interested in printing it separately.
10% Infill.
3 Walls.
*if you find the Rattle beads are partially fused to the bottom does to elephant's foot artifacts, try pushing them in with a pointed object like a pen.
This model has been successfully printed down to 70%. Below that the joint function may start to become compromised. YMMV
| Date published | 06/01/2023 |
| Precio | $3.95 |
| Sin apoyo | YES |
80% in Eyrone Dual Blue/Green!