Replica Airsoft Silencer Spiral With 14mm Negative Threads
1,382
visitas
0 comentarios
Cargando comentarios...
$2.00 Replica Airsoft Silencer Spiral With 14mm Negative Threads
3D
Published 2021-06-16T08:04:57+00:00
4
0
Add to Collection
Descripción
This is a stylized replica non working silencer for an airsoft gun. It attaches via 14mm netagive threads which are printed seperatly.
This is to allow you to print the silencer at a higher layer height, and the threads at a 0.1mm layer height. the threads are then pressed and glued inside of the silencer.
The barrel needs to be printed with the threads pointing up and the end of the barrel pointing down on the bed
Detalles de impresión
The barrel needs to be printed with the threads pointing up and the end of the barrel pointing down on the bed
The threads need to be printed at a 0.1mm layer height
Información técnica
Date published | 16/06/2021 |
Precio | $2.00 |
¿Cuándo tiempo lleva? | 7 - 7 minutos |
Sin apoyo | YES |
Más información
Archivos