Robo3d Camera Mount (Logitech 270)
Robo3d Camera Mount (Logitech 270)
3D
Published 2017-07-17T14:55:28+00:00
Hey every one,
This is my first ever upload so please bare with me!
I recently got into using Octopi (love it btw) and wanted to use the webcam feature. i went down to my local big box store and picked up a Logitech C270 for around 30 bucks, plugged it into the Octopi and it worked amazing right off the bat. All though i struggled on where to mount the camera. I used gorilla tape and taped it all over the place but nothing really did what i wanted it to do.
i looked around for a mount and was super pumped that there were lots that could be used. The downfall to having a custom Robo3D is that things that work for every one else dont necessarily work for you. I have an enclosure around my Robo3d which makes printing ABS a breeze, but with the enclosure comes limited space (hence the reason for the project)
(enclosure can be found here https://printedsolid.com/products/robo-3d-safety-enclosure-kit )
i located a part on here made by adamsgl (from Thingiverse) which was the original inspiration for this project. What was supposed to be a remix ended up being a full redesign
Long story short and 7 revisions later i came up with this functional design
If you have any questions please feel free to ask
Thanks for looking and happy printing!
The mount prints in 3 different parts,
Main body - Needs to be printed with support. There is a 1mm keeper channel on the top part of the main body this will need support, also the horizontal screw section located on the back side of the main body that will require support. The embedded screw channel is hollow to the other side so getting the support out is a breeze.
Camera mount - When you go to add your support make sure to add a little support under the hinge curves it really just helps keep the hinge portion round. it can be printed with out those little extra supports.
Mount connection - Could be printed with the same little hinge supports
As you can see by the photos it installs under the print bed glass. it fits snugly also allows some side to side movement of the mount body.
Once you get everything printed i used 2x 4-40x1/2" screws and 2 x washers that fit (sorry we didn't have metric where i live how ever the measurements are 2.7mm from thread to thread and 12 mm long) to attach the Mount connection to the Main body. They thread directly into the ABS.
To attach the Camera Mount to the Mount connection i used 2x 6/32 (3.37mm T2T x 12mm long with 2x washers to fit.
One other thing to note, once you get this printed and installed, i took the camera apart to adjust the focal point to be directly on the prints rather than the back of the enclosure. you can learn how to do this procedure here ( https://www.youtube.com/watch?v=v-gYgBeiOVI )
i also use an elastic to hold the camera in, every iteration that i used to hold it in before failed. Also allows easy access to the camera if need be.
As you can see by the camera view you can clearly see the 2 screwdrivers i used to mark the back corners of the build plate.
| Date published | 17/07/2017 |
| ¿Cuándo tiempo lleva? | - 240 minutos |
| Cantidad de filamento | 27.52 |
| Dimensiones | 76x100 |