Robo BirdFeeder #TinkerFun
Robo BirdFeeder #TinkerFun
Published 2018-07-02T15:10:47+00:00
This object was made in Tinkercad.
Robo Birdfeeder with tilting tray to accommodate the bird's weight and spinning propellers in the wind. Something fun for summer! #Tinkerfun
Use supports as needed for your printer. I recommend using a filament that will weather well with UV. Besides the print, you will need an epoxy or strong glue to attach his hands to the bar on the tray piece. If you would like to seal him, I recommend Kennel-Seal. It's safe for the birdies.
I printed this is 2 parts, one for the tray, one for the robot. I got him bigger that way. The total print was 23 hours with a 15% fill, .18 layer height. Size is up to you, and the size of your local birds.
Date published | 02/07/2018 |
¿Cuándo tiempo lleva? | 20 - 30 minutos |
Cantidad de filamento | depends on size |
Dimensiones | 277 x 219 x 140 as saved |
Tecnología | FDM |
Complejidad | Fácil |