Rose USB Flash Drive
3,292
visitas
138
descargas
0 comentarios
Cargando comentarios...
Rose USB Flash Drive
3D
Published 2017-12-18T17:48:31+00:00
8
0
Add to Collection
Descripción
This is my model of a USB flash drive with a rose pattern on it.
You can use a regular slim USB flash drive with following dimensions 34,6x12,5x2,4mm. Perhaps slight modifications are necessary to fit the USB drive because this model is a tight fit.
Some tips:
If the USB flash drive is too lose just add some layers of thin tape around the end of the flash drive
If the USB flash drive doesn’t fit. Try to trim the sides (carefully!) make sure you do not harm the circuits. Only cut away the plastic.
Print details:
Printed without support, with 0,1mm layer height and 6 shells
Detalles de impresión
Printed without support
with 0,1mm layer height and 6 shells
Información técnica
Date published | 18/12/2017 |
¿Cuándo tiempo lleva? | 120 - 180 minutos |
Cantidad de filamento | 8,91g |
Dimensiones | 49x11,5x21,8mm |
Sin apoyo | YES |
Más información
Archivos