Sandget Fidwich
$15.00 Sandget Fidwich
Published 2024-05-06T16:22:01+00:00
Why pay for this single file when you have over one thousand more for a lot less? That’s right. STLFLIX is a multi-theme ever-growing library of STL files. Your One-Stop-Shop for Premium 3D-Printing models. Get started with the Ultimate STL platform!
Sandget Fidwich
A magnetized sandwich solves the problem of everything falling off at the first bite.
This STL file is recommended for FDM Printers!
3D Printing Time Based on Ender 3: 05Hours 40 Minutes (will vary accord to you printer model)
Approximately Length: 5 cm
Instructions for place the magnetics inside the sandwich on How to slice video
COPYRIGHT & SELLING RIGHTS
This STL file is copyrighted by STLFLIX©, the Ultimate STL Subscription. This means you can print it for yourself, but you DO NOT have the right to sell it.
To acquire copyright & selling rights, you must subscribe to our Commercial License. By doing so, you will also get immediate access to over 500 STL files, unlimited downloads, and marketing content for every single file.
Go commercial and skyrocket your own store with STLFLIX!
USEFUL LINKS
Get to know us a little better!
Website | Instagram | TikTok | Twitter
What are you waiting for? Join thousands of other makers from all around the world.
HAPPY PRINTING!
Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.16 mm
Recommended Layer Height: 0.16 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Date published | 06/05/2024 |
Precio | $15.00 |