TribesTiendaCrowdfundingFORUMNEWCanvasThe AdventureNEWPhysical

Scritcher // Print in Place Tiny Hands!

3D File Logo  3D

Published 2020-04-03T08:29:58+00:00

    Scritcher // Print in Place Tiny Hands! image
    Scritcher // Print in Place Tiny Hands! image
    Scritcher // Print in Place Tiny Hands! image
    Scritcher // Print in Place Tiny Hands! image
    Scritcher // Print in Place Tiny Hands! image
    Scritcher // Print in Place Tiny Hands! image
    Scritcher // Print in Place Tiny Hands! image
    Scritcher // Print in Place Tiny Hands! image
    Scritcher // Print in Place Tiny Hands! image
    Scritcher // Print in Place Tiny Hands! image
    Scritcher // Print in Place Tiny Hands! image
    Scritcher // Print in Place Tiny Hands! image
Loader
3D
360°
16,626 visitas 3,495 descargas
18 colecciones
Imágenes de la comunidad Añadir tu imágen
Loader
  • Picture of print of Scritcher // Print in Place Tiny Hands!
  • Picture of print of Scritcher // Print in Place Tiny Hands!
  • Picture of print of Scritcher // Print in Place Tiny Hands!
  • Picture of print of Scritcher // Print in Place Tiny Hands!
  • Picture of print of Scritcher // Print in Place Tiny Hands!
  • Picture of print of Scritcher // Print in Place Tiny Hands!
  • Picture of print of Scritcher // Print in Place Tiny Hands!
  • Picture of print of Scritcher // Print in Place Tiny Hands!
  • Picture of print of Scritcher // Print in Place Tiny Hands!
  • Picture of print of Scritcher // Print in Place Tiny Hands!
18 comentarios
    Cargando comentarios...

    Scritcher // Print in Place Tiny Hands!

    3D File Logo  3D

    Published 2020-04-03T08:29:58+00:00

    Devin Montes

    @MakeAnything

    512 objetos

    12,734 Seguidores
    278 18 Add to Collection
    Descripción

    need a hand?

    Keep your big hands clean with these little hands. Great for both scritches and scratches. How versatile!

    Prints-in-place and works off the bed. Just make sure your printer can handle clearances down to 0.4mm.

    Not tiny enough? You want a Scritcher mini

    Mostrar más Mostrar menos
    Licencia
    Detalles de impresión

    Suggested settings

    0.1-0.15mm layer height, 3 outlines/perimiter shells, 7 top/bottom layers, 10% rectangular infill

     

    My PLA printed Scritchers have survived lots of scritches unfazed so far! If you experiment with other materials, please share your results. I would expect ABS or ASA to do well, maybe with higher infill to maintain some ridigity.

    Información técnica
    Date published 03/04/2020
    Sin apoyo YES
    Más información
    Archivos
    Scritcher Left.stl
    3D View
    Scritcher Right.stl
    3D View
    Etiquetas
    print face hand hands mechanical small little arm in place pip back tiny scratcher compliant
    Objetos interesantes para ti
    Mostrar más