SMARTPHONE CAR STAND
SMARTPHONE CAR STAND
3D
Published 2019-09-23T17:30:30+00:00
I designed this support in order to use my smartphone as GPS in my car. I thought it was a good idea to place it on the dashboard since it has a flat part to support it.
The Base is fixed by means of adhesive velcro to the dashboard and although it can be removed, I always leave it fixed in the car so I printed it in PETG to resist temperature changes by car.
The rest of the pieces I printed on pla, and I use it as a support for my smartphone at home
The support is very stable, strong and adjustable. It fits the smartphone using a rubber band, which presses to adjust it.
Some pieces have been modified (improvements) and will not match the photos.
I am sorry to use some metal screws and nuts, but it is necessary for a reliable and solid assembly
I do not speak English, I'm sorry for the mistakes, I'm practicing little by little
* The positions of the stls are oriented to be printed
Infill Density: 35%
Shells: 3
Layer Height: 0.25mm
PRINTED PARTS
Base (recommended petg)
Phone Mount Base
Phone Mount (Support everywhere or configurable)
Top Guide
2 x M3 Nut Wrench
HARDWARE
2 x Conic Head Screw M3 x 20 mm
3 x M3 Nut
Rubber band
* Use American tape as protection on the PHONE MOUNTr, to protect the smartphone and it does not slip.
| Date published | 23/09/2019 |
| ¿Cuándo tiempo lleva? | 300 - minutos |
| Cantidad de filamento | 65 gr |