Space Shuttle Alpha Bus Variant Upgrade
$3.95 Space Shuttle Alpha Bus Variant Upgrade
3D
Published 2020-02-04T13:25:51+00:00
Modify Space Shuttle Alpha to integrate this Bus Variant. Now includes parts to make compatible with the Shuttle Alpha MKIIIB. Please note that you will need the base ship to be able to build this variant.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2019 Starship III Kickstarter.
Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes:
- Shuttle - Bus Variant - Forward Left Wing.stl
- Shuttle - Bus Variant - Forward Right Wing.stl
- Shuttle - Bus Variant - Lower Central Fuselage Extension.stl
- Shuttle - Bus Variant - Upper Central Fuselage Extension.stl
- Shuttle - Bus Variant - Upper cockpit Fuselage.stl
- Alpha MKIIIB - Fuselage - Forward - Nose - Top - Extended Hull.stl
- Alpha MKIIIB-MKIV - Fuselage - Cabin Extension - Bottom.stl
- Alpha MKIIIB-MKIV - Fuselage - Cabin Extension - Top.stl
The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
| Date published | 04/02/2020 |
| Precio | $3.95 |